Best Grinding Wheel for Chainsaw Sharpener

Grinding Wheels are one of the basic necessities of chainsaw sharpening, whether it’s done by hand or with a bench grinder.

So, we thought it would be useful to compile this list of the best grinding wheel for chainsaw sharpener in order to help you make the most informed decision possible when purchasing grinding wheels for your chainsaw sharpener.

In a Hurry Here are Our Top Picks:

Editor's Choice
OREGON OR534-316A Grinding Wheel Saw Chain, 3/16...
Timber Tuff CS-BWM018 Chain Sharpener Grinding...
Faithfull FPPCHAINSSW Chainsaw Sharpener Grinding...
OREGON OR534-316A Grinding Wheel Saw Chain, 3/16...
Timber Tuff CS-BWM018 Chain Sharpener Grinding...
Faithfull FPPCHAINSSW Chainsaw Sharpener Grinding...
3/16 Inch
1/8 Inch
1/8 Inch
Editor's Choice
OREGON OR534-316A Grinding Wheel Saw Chain, 3/16...
OREGON OR534-316A Grinding Wheel Saw Chain, 3/16...
3/16 Inch
Timber Tuff CS-BWM018 Chain Sharpener Grinding...
Timber Tuff CS-BWM018 Chain Sharpener Grinding...
1/8 Inch
Faithfull FPPCHAINSSW Chainsaw Sharpener Grinding...
Faithfull FPPCHAINSSW Chainsaw Sharpener Grinding...
1/8 Inch

How to Choose the Best Grinding Wheel for Chainsaw Sharpener?

The grinding wheel is the most important and expensive part of a chainsaw sharpener. What are the factors that you should consider when choosing the best grinding wheel?

The grit size: The higher the grit size, the finer it is and it can sharpen chainsaws with more wear. However, it will not be as durable as lower grit sizes. The lower grit size will be more durable but won’t be able to sharpen chainsaws with as much wear.

The hardness of the material: A harder material will last longer than a softer material but may not sharpen as well.

The length of the wheel: Short wheels are cheaper and easier to install but may not work for all chainsaw models. Longer wheels are more expensive but can work for any type of chainsaw.

The weight of the saw: Lighter saws require shorter wheels to balance out the load and longer wheels for heavier models.

What is the Best Grinding Wheel for Chainsaw Sharpener?

Our goal is to provide you with an unbiased review of each product and let you know what our favorite option is out of all 6 products listed below…

1. OREGON OR534-316A Grinding Wheel Saw Chain, 3/16 Inch

OREGON OR534-316A Grinding Wheel Saw Chain, 3/16...

Pros

  • Very good quality
  • The top surface is coated with a hard coating which makes it more durable
  • Affordable

Cons

  • The top surface is not very smooth

The Oregon OR534-316A Grinding Wheel Saw Chain will do wonders to keep your chains in the top, cutting-edge shape. The grinding wheel leaves a precision finish on the saw chain and works with all full-size Oregon Grinders.

It is intended for use with.325-Inch (20,21,22,95 chains only), 3/8-inch (all except 90 and 91 chains), and 404-inch. Comes with a standard 8/32 shaft and hard chrome coating and a ceramic bond.

Check Price on Amazon

2. Timber Tuff CS-BWM018 Chain Sharpener Grinding Wheel

Timber Tuff CS-BWM018 Chain Sharpener Grinding...

Pros

  • This wheel is great for sharpening chains and gears

Cons

  • It’s a bit pricey

If you have tools and appliances that need sharpening, Timber Tuff CS-BWM018 is the right tool! This high-quality grinder wheel is designed to sharpen a wide variety of cutting tools and implements, specifical chains.

It has a 3/8-inch shank, measuring 6-5/8 inches in diameter, and can be mounted in a bench grinder or angle grinder. Plus, if you’re looking for a wheel that will get the job done fast, this machine has a large wheel diameter of 3-3/4 inches which will save you time and effort. It’s fast and handy!

Check Price on Amazon

3. Oregon OR534-18A Grinding Wheel, 5-3/4-Inch by 1/8-Inch

Oregon OR534-18A Grinding Wheel, 5-3/4-Inch by...

Pros

  • Resists burning of the cutters
  • Leaves a precision finish
  • Can be used for grinding 3/8″ Low Profile and 1/4″ pitch chains

Cons

  • Need to replace the bushings

Oregon’s OR534-18A Grinding Wheel can be used to rake outside rails and oval pulleys on a variety of different grinding machines. It features a top-quality bond and a specially designed balance point that helps to prevent vibration. The grinding wheel also has a heat-treated tool steel construction that resists burning and leaves a precision finish.

The grinding wheel can be used with a number of grinders and each one is designed to be easily adjusted. The grinding wheel is used for grinding chains that have a 3/8″ low profile and 1/4″ pitch. It is 7/8″ in diameter and has a 5-3/4″ outer diameter.

Check Price on Amazon

4. Timber Tuff CS-BWM732 Chain Sharpener Grinding Wheel

Timber Tuff CS-BWM732 Chain Sharpener Grinding...

Pros

  • The grinding wheel has a high speed to keep the chain link smooth and round
  • The replacement wheel is easy to install
  • It sharpens your grinding wheels very well

Cons

  • The grinding wheel can wear out quickly and needs to be replaced

The Timber Tuff CS-BWM732 Chain Sharpener Grinding Wheel is a replacement wheel that is compatible with the Timber Tuff CS-RW-EZ Chain Sharpener.

The sharpening wheel is designed to sharpen the chain of circular saws, miter saws, drills, and routers, and is compatible with any 9/16-inch spindle. The wheel features a 5-11/16-inch diameter and a 7/8-inch width. It has a 7/32-inch arbor hole and a 1/2-inch thickness.

This sharpening wheel is designed for use with a maximum speed of 3600 RPM. It has a 3/4-inch bore, a 5/16-inch arbor hole, and a 1/2-inch bore. It is made out of steel and comes with a black oxide finish.

Check Price on Amazon

5. Faithfull FPPCHAINSSW Chainsaw Sharpener Grinding Wheel 110 x 3.2mm

Faithfull FPPCHAINSSW Chainsaw Sharpener Grinding...

Pros

  • It is durable
  • It is also easy to use
  • It is easy to sharpen
  • It is inexpensive

Cons

  • Not all chainsaw models will fit the whee

This 110mm diameter x 3.2mm thick grinding wheel is ideal for quickly sharpening chainsaw chains in the field. It is designed to fit the FPP CHAINS chainsaw sharpener and comes in a size of 100mm in diameter by 3.2mm in thickness.

Once your chain has become blunt, simply remove it from the bar and fit the sharpener. The grinding wheel will remove metal to leave a new cutting surface on your chain. This durable option will deliver long life and reliable performance for a low price.

Check Price on Amazon

6. Timber Tuff CS-BWM316 Chain Sharpener Grinding Wheel

Timber Tuff CS-BWM316 Chain Sharpener Grinding...

Pros

  • Good quality
  • Affordable
  • Good size for the price
  • It can be used to sharpen chains of different diameters

Cons

  • It’s a bit pricey

The Timber Tuff CS-BWM316 3/16″-3/8″ Chain Sharpener Grinding Wheel is a must-have for those looking for high quality, cost-effective way to maintain the sharpness of their chain saws. This is one of the best accessories for chainsaws that can be used with a handheld grinding wheel sharpener.

The Timber Tuff CS-BWM316 3/16″-3/8″ Chain Sharpener Grinding Wheel has a diameter of 12 1/2 inches and is round, making it compatible with all standard 3/8″ grinding wheels.

The CS-BWM316 3/16″-3/8″ Chain Sharpener Grinding Wheel is capable of grinding, sharpening, and dealing with flat, concave, and convex shapes, giving you the versatility and ability to work with a variety of different grinding wheel applications all from one wheel.

This product is made from high-grade material, giving it a long life and making it sturdy. The Timber Tuff CS-BWM316 3/16″-3/8″ Chain Sharpener Grinding Wheel is a must-have for anybody who deals with chainsaws on a regular basis and wants to ensure the sharpness and quality of the saw, for optimum performance.

Check Price on Amazon

Final Word

The OREGON OR534-316A Grinding Wheel Saw Chain, 3/16 Inch is the best grinding wheel for chainsaw sharpener on the market in my opinion. It is affordable and durable and does a great job of sharpening your chainsaw.

It is easy to use and will get your chainsaw sharp fast. It comes with grinding wheels that can be used for different applications. This tool is a great investment and will save you a lot of time and money in the long run.


FAQs

What is a grinding wheel?

Grinding wheels are used in many industries to cut, shape, and smooth a variety of materials.

Grinding wheels are typically made of cast iron or steel. They have a round shape and come in different sizes depending on the material they are being used on. The material to be ground is placed on the wheel and rotated against it with pressure. There are three main types of grinding wheels: abrasive cut-off wheels, abrasive flap discs, and grinding stones.

Abrasive cut-off wheels use an abrasive material like silicon carbide or aluminum oxide to grinding metal quickly with a high level of precision for making straight cuts through metal sheets or pipes. Abrasive flap discs usually have a softer abrasive such as silicon carbide that can be used for polishing metals without damaging them.

What are the benefits of chainsaw sharpening with a grinding wheel?

Chainsaw sharpening with a grinding wheel is a process that is done by many people. There are many benefits of chainsaw sharpening with a grinding wheel. Chainsaws are used for many different things and as such, they need to be able to work efficiently.

Sharpening the chainsaw blade with a grinding wheel is something that needs to be done frequently. This will ensure that the chainsaw will cut through whatever it needs to cut through in an efficient manner.

The benefits of chainsaw sharpening with a grinding wheel are numerous and include:

  • More efficient cutting
  • Less time spent on maintenance
  • Less chance of injury

How to sharpen your chainsaw with grinding wheels?

One of the best ways to sharpen a chainsaw is by using a grinding wheel. Grinding wheels are commonly used by metalworkers and carpenters to smooth out metal or wood surfaces. They are very similar to sandpaper in that they both remove material from an object through friction.

The following steps can be followed in order to sharpen a chainsaw with a grinding wheel:

Place the grinding wheel on the ground with the teeth facing up, then place your saw on top of it so that the teeth are facing downward. Slowly rotate your saw around the wheel, making sure not to apply too much pressure.

You should feel resistance as you do this, but if it feels like you’re pushing down too hard then you’re not doing it correctly and will likely damage the wheel. Don’t forget to lubricate the axle and wheel regularly with a light layer of spray oil or WD-40 before you start cutting again.

Similar Posts